1#@!#!123s

: / proc / self / cwd / wp-includes / SimplePie / src / HTTP /
Filename : Response.php
back
<?php

// SPDX-FileCopyrightText: 2004-2023 Ryan Parman, Sam Sneddon, Ryan McCue
// SPDX-FileCopyrightText: 2014 PHP Framework Interoperability Group
// SPDX-License-Identifier: MIT

declare(strict_types=1);

namespace SimplePie\HTTP;

/**
 * HTTP Response interface
 *
 * This interface must be interoperable with Psr\Http\Message\ResponseInterface
 * @see https://www.php-fig.org/psr/psr-7/#33-psrhttpmessageresponseinterface
 *
 * @internal
 */
interface Response
{
    /**
     * Return the string representation of the permanent URI of the requested resource
     * (the first location after a prefix of (only) permanent redirects).
     *
     * Depending on which components of the URI are present, the resulting
     * string is either a full URI or relative reference according to RFC 3986,
     * Section 4.1. The method concatenates the various components of the URI,
     * using the appropriate delimiters:
     *
     * - If a scheme is present, it MUST be suffixed by ":".
     * - If an authority is present, it MUST be prefixed by "//".
     * - The path can be concatenated without delimiters. But there are two
     *   cases where the path has to be adjusted to make the URI reference
     *   valid as PHP does not allow to throw an exception in __toString():
     *     - If the path is rootless and an authority is present, the path MUST
     *       be prefixed by "/".
     *     - If the path is starting with more than one "/" and no authority is
     *       present, the starting slashes MUST be reduced to one.
     * - If a query is present, it MUST be prefixed by "?".
     * - If a fragment is present, it MUST be prefixed by "#".
     *
     * @see http://tools.ietf.org/html/rfc3986#section-4.1
     */
    public function get_permanent_uri(): string;

    /**
     * Return the string representation of the final requested URL after following all redirects.
     *
     * Depending on which components of the URI are present, the resulting
     * string is either a full URI or relative reference according to RFC 3986,
     * Section 4.1. The method concatenates the various components of the URI,
     * using the appropriate delimiters:
     *
     * - If a scheme is present, it MUST be suffixed by ":".
     * - If an authority is present, it MUST be prefixed by "//".
     * - The path can be concatenated without delimiters. But there are two
     *   cases where the path has to be adjusted to make the URI reference
     *   valid as PHP does not allow to throw an exception in __toString():
     *     - If the path is rootless and an authority is present, the path MUST
     *       be prefixed by "/".
     *     - If the path is starting with more than one "/" and no authority is
     *       present, the starting slashes MUST be reduced to one.
     * - If a query is present, it MUST be prefixed by "?".
     * - If a fragment is present, it MUST be prefixed by "#".
     *
     * @see http://tools.ietf.org/html/rfc3986#section-4.1
     */
    public function get_final_requested_uri(): string;

    /**
     * Gets the response status code.
     *
     * The status code is a 3-digit integer result code of the server's attempt
     * to understand and satisfy the request.
     *
     * @return int Status code.
     */
    public function get_status_code(): int;

    /**
     * Retrieves all message header values.
     *
     * The keys represent the header name as it will be sent over the wire, and
     * each value is an array of strings associated with the header.
     *
     *     // Represent the headers as a string
     *     foreach ($message->get_headers() as $name => $values) {
     *         echo $name . ': ' . implode(', ', $values);
     *     }
     *
     *     // Emit headers iteratively:
     *     foreach ($message->get_headers() as $name => $values) {
     *         foreach ($values as $value) {
     *             header(sprintf('%s: %s', $name, $value), false);
     *         }
     *     }
     *
     * @return array<non-empty-array<string>> Returns an associative array of the message's headers.
     *     Each key MUST be a header name, and each value MUST be an array of
     *     strings for that header.
     */
    public function get_headers(): array;

    /**
     * Checks if a header exists by the given case-insensitive name.
     *
     * @param string $name Case-insensitive header field name.
     * @return bool Returns true if any header names match the given header
     *     name using a case-insensitive string comparison. Returns false if
     *     no matching header name is found in the message.
     */
    public function has_header(string $name): bool;

    /**
     * Retrieves a message header value by the given case-insensitive name.
     *
     * This method returns an array of all the header values of the given
     * case-insensitive header name.
     *
     * If the header does not appear in the message, this method MUST return an
     * empty array.
     *
     * @param string $name Case-insensitive header field name.
     * @return string[] An array of string values as provided for the given
     *    header. If the header does not appear in the message, this method MUST
     *    return an empty array.
     */
    public function get_header(string $name): array;

    /**
     * Return an instance with the provided value replacing the specified header.
     *
     * This method MUST be implemented in such a way as to retain the
     * immutability of the message, and MUST return an instance that has the
     * new and/or updated header and value.
     *
     * @param string $name Case-insensitive header field name.
     * @param string|non-empty-array<string> $value Header value(s).
     * @return static
     * @throws \InvalidArgumentException for invalid header names or values.
     */
    public function with_header(string $name, $value);

    /**
     * Retrieves a comma-separated string of the values for a single header.
     *
     * This method returns all of the header values of the given
     * case-insensitive header name as a string concatenated together using
     * a comma.
     *
     * NOTE: Not all header values may be appropriately represented using
     * comma concatenation. For such headers, use getHeader() instead
     * and supply your own delimiter when concatenating.
     *
     * If the header does not appear in the message, this method MUST return
     * an empty string.
     *
     * @param string $name Case-insensitive header field name.
     * @return string A string of values as provided for the given header
     *    concatenated together using a comma. If the header does not appear in
     *    the message, this method MUST return an empty string.
     */
    public function get_header_line(string $name): string;

    /**
     * get the body as string
     *
     * @return string
     */
    public function get_body_content(): string;
}